In this article I am going to discus What Sata Standard Provides A Transfer Rate Of 3 Gb/sec so let’s discuss.
The IDE interface, parallel ATA is used to connect the drives. The drives represent hard drives, optical drives. These drives are connected to the motherboard or our storage cards. The IDE has some applications and limitations. We have to set the master and the slave devices.
It works very slow compared to what we need to connect to the storage interface. The below figure represents the SATA interface. It contains the pins for the data all under the connector. It is in the form of L shape so we can connect it only one way to correspond with the cable. The Orginal SATA is easy to connect to the motherboard and difficult to remove without breaking the SATA.
The SATA one can be identified by these characteristics. The SATA two has a different evolutionary step. In SATA two, when we first start seeing the ports at the right end of the side of the motherboard. It can also lock the connectors. so it makes the SATA more secure, also convenient, and faster. The speed is the biggest difference from the SATA 1, SATA 2, and SATA 3 evolution.
The SATA one works with 1.5 gigabits per second interface. But why we have moved to the SATA 2, SATA 3, if the SATA 1 speed is enough for the transmission of the cable. The SATA 3 has a speed of 3 gigabits per second. The SSD pretty much needs for the SATA 3 gigabit per second and the colloquial is known as the SATA 2. They need the SATA 2 interface in order to perform.
- Difference between Cat5 and Cat6 cable
- Connect to Cisco Switch/Router Using USB Console Cable
- Crossover Cable and Straight Through Cable
The performance was the big reason that we transitioned over to say. The SATA 3 is the colloquial term. The SATA 6 is capable of 500 megabytes per second.
I hope you gone through What Sata Standard Provides A Transfer Rate Of 3 Gb/sec is.