Your question is “What is the maximum throughput of a ds3 connection?” well, lets discuss.
Let us study the connection between the DS3 connection. DS3 stands for digital signal level 3 T carrier. This can also be called the T3 line. The data rate for this type of signal is 44.736 Mbits/s. The DS3 level of the carrier can transport at a rate of 672 DSO level channels in the payload. These circuits are usually can be both wired and wireless connections.
Telephone carriers by the OCI connection cablings. The interconnect connections must be made with the 75-ohm coaxial cable and with its connectors. The cables and connectors with 50 ohms will significantly deviate from the 75 ohm that causes reflections that lower the performance of the connection.
Generic requirements for the central office coaxial cable G-139-CORE will define the type 734 and 735 cables for the application. Due to the cause of the losses that differing the distance limitations for each type of the cable. Type 734 consists of the larger center conductor and the insulator for the lower losses from the given distance.
Typically, the BNC connectors are very significant, as the coiling and cable stripping tools are used to install them. There are some of the 75-ohm connectors like Cannon, Amphenol, Kings, can are. The RG-6 and the RG 5 are the inexpensive cables to work temporarily when we are properly connected.
The type 735 26 AWG is used for the interconnects up to 225 feet and the type 734 20 AWG is used for the interconnection up to the feet of 450. The DS3 services are provided to the services to the business mostly in the United States through a local exchange carrier and through a competitive local exchange carrier communication. The price may be of the T1 line that consists of two primary components, the loop, and the port. And also the central office multiplexing.
I hope you have read and understand the explanation for Maximum Throughput Of A Ds3 Connection.